Rogowski coil MFC150

from 87,70

Rogowski Coil MFC150 (8 mm cross section) is a flexible current transducer based on Rogowski principle. MFC150 coils are available in different sizes and can be supplied according to customer’s design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/ or weight.
MFC150 coil is provided with a shield against the influence of external magnetic fields, therefore it grants a stable measurement from low currents to hundreds of kA. The Rogowski coils must be connected to an electronic integrator. Our power meters UPM209 and UPM309 can interface Rogowski coils directly without the need of the external integrators (Smart kits). This is an advantage because there is no external boxes or any power supply with consequent ease of use.
MFC150 can be also provided with built-in integrator, without needing of external devices for 90° phase shift compensation and frequency equalization. This is an advantage because there is no external box with consequent ease of use. Our power meters UPM209 and UPM309 can interface Rogowski coils directly without the need of the external integrators (Smart kits).



Datasheet
User manual
UL recognized manual
Video

CONFIGURATIONS AVAILABLE IN THE E-COMMERCE REQUEST MORE INFORMATION

SKU: N/A Category: Tag:

NAMEDESCRIPTIONStockPRICEQUANTITYBUY
Rogowski coil MFC150 - MFC150 3104.0005.0001MFC150 length 25cm Ø ~5 (5x7.5)cm calibrated 3m cableOut of stock87,70€ VAT excluded
Availability to be confirmed.
Contact us for more information
Rogowski coil MFC150 - MFC150 3104.0013.0001MFC150 length 35cm Ø ~9 (9x10)cm calibrated 3m cableOut of stock90,80€ VAT excluded
Availability to be confirmed.
Contact us for more information
Rogowski coil MFC150 - MFC150 3104.0021.0001MFC150 length 60cm Ø ~17.5cm calibrated 3m cableOut of stock95,10€ VAT excluded
Availability to be confirmed.
Contact us for more information
Rogowski coil MFC150 - MFC150 3104.0023.0001MFC150 llength 90cm Ø ~27cm calibrated 3m cableOut of stock134,90€ VAT excluded
Availability to be confirmed.
Contact us for more information
Rogowski coil MFC150 - MFC150 3101.0009.0001

ONLY FOR RPS50/FCA3000 CONVERTER (not included)

MFC150 length 60cm Ø ~17.5cm calibrated for Algodue device 3m cable
Out of stock95,10€ VAT excluded
Availability to be confirmed.
Contact us for more information
Rogowski coil MFC150 - MFC150/F 3118.0001.0001

WITH BUILT-IN INTEGRATOR - (333mV/1kA OUTPUT VALUE)

MFC150/F length 40cm Ø ~11cm calibrated 3m cable
Out of stock159,60€ VAT excluded
Availability to be confirmed.
Contact us for more information
Rogowski coil MFC150 - MFC150/F 3118.0002.0001

WITH BUILT-IN INTEGRATOR - (333mV/2kA OUTPUT VALUE)

MFC150/F length 60cm Ø ~17.5cm calibrated 3m cable
Out of stock168,80€ VAT excluded
Availability to be confirmed.
Contact us for more information

Description

DO YOU NEED ADDITIONAL CONFIGURATIONS?

For other configurations contact the sales representative

TECHNICAL SPECIFICATIONS

Transducer
Coil length: from 25 to 300 cm
Coil diameter: 8.3 ±0.2 mm
Fastening: bayonet holder
Weight: from 150 to 500 g
Material: thermoplastic UL94-V0

Electrical characteristics for model without integrator
Nominal output rate: 100 mV / kA @ 50 Hz (RMS values)
Max measurable current: 100 kA
Coil resistance: 70 … 900 Ω
Positioning error: Better than ±1% of reading
Frequency: 50/60 Hz
Overvoltage category: 1000 V CAT III, 600 V CAT IV
Pollution degree: 2
Insulation test voltage: 7400 VRMS / 1 min

Electrical characteristics for model with integrator
Power voltage: 4 … 26 VDC
Max consumption: 5 mADC
Nominal output rate: 333 mV / FS (RMS values)
FS changes according to the model: 1, 2, 5 kA
Positioning error: Better than ±1% of reading
Frequency: 50/60 Hz
Overvoltage category: 1000 V CAT III, 600 V CAT IV
Pollution degree: 2
Insulation test voltage: 7400 VRMS / 1 min

Connection cable for model without integrator
Type: 3 x 22 AWG shielded
Length: 3 m. Other lengths on request: 5, 7, 10, 15 m

Connection cable for model with integrator
Type: 5 x 22 AWG shielded
Length: 3 m. Other lengths on request: 5, 7, 10, 15 m

Enviromental conditions
Operating temperature: from -30°C to +80°C
Storage temperature: from -40°C to +80°C
Protection degree: IP67 or IP68 according to the model (not evaluated by UL)

Standard compliance
IEC, UL standards: UL 61010-1 Ed3, UL 61010-2-032, CAN/CSA-C22.2 No. 61010-1,IEC 60529

Certification

RELATED PRODUCTS