CONVERTERS
CONVERTERS
CONVERTERS

Multiscale single Rogowski coil converter RPS50

from 259,20€

RPS50 is a multiscale Rogowski coil integrator, in a compact DIN rail enclosure, powered directly from the mains.
An integrator is essential to equalize and shift by 90° the output signal from the Rogowski coils. It consists of an active electronic circuit with negligible offset and a good linearity. RPS50 can be combined with any model and size of MFC150 Rogowski coils. The module is available in the standard configuration with one of the 3 following full scales:
0.5 – 2.5 – 10 kA or 2.5 – 10 – 50 kA or 10 – 50 – 250 kA.
Two different outputs are available.
RPS50 and a Rogowski current transducer is a very flexible system, suitable for high power load analysis, impulsive current monitoring, DC ripple measurement, etc.



Catalogue
Datasheet
User manual

CONFIGURATIONS AVAILABLE IN THE E-COMMERCE REQUEST MORE INFORMATION

SKU: N/A Category: Tag:

NAMEDESCRIPTIONStockPRICEQUANTITYAdd to cart
Multiscale single Rogowski coil converter RPS50 - RPS50 2102.0010.0001RPS50 per singola bobina Rogowski fondo scala 2,5-10-50kA uscita 1 3V RMSAvailability to be confirmed259,20€ VAT excluded Availability to be confirmed.
Contact us for more information
Multiscale single Rogowski coil converter RPS50 - RPS50 2102.0046.0001RPS50 per singola bobina Rogowski fondo scala 2,5-10-50kA uscita 1 3V RMS uscita 2 0...10VCCAvailability to be confirmed334,30€ VAT excluded Availability to be confirmed.
Contact us for more information

Description

DO YOU NEED ADDITIONAL CONFIGURATIONS?

For other configurations contact the sales representative

REQUEST MORE INFORMATION

TECHNICAL SPECIFICATIONS

Power supply
Rated voltage: 80…250 VAC 50/60 Hz
Consumption: 1.5 VA max

Electrical characteristics
Input: 1 for Rogowski coil
Input level (RMS) (1): 100mV/1kA@50Hz (only if purchased without MFC150 coil)
Output 1: 1 VRMS (max crest factor 4.5)
3 VRMS (max crest factor 1.5)
Output 1 load: › 10 kOhm
Output 2: 0…10 VDC (on request: 0…20 mA, 4…20 mA)
Full scales values: 0.5 – 2.5 – 10 kA
2.5 – 10 – 50 kA
10 – 50 – 250 kA
Accuracy (2): better than ±1% of full scale (not guaranteed for full scale ≤10 mV)
Frequency range (3): 8 Hz to 100 kHz@-3dB

Environmental conditions
Operating temperature: from -10°C to +50°C
Storage temperature: from -25°C to +70°C
Relative humidity: 80% max without condensation

Mechanical characteristics
Material: plastic enclosure
Protection degree: IP20
Size / weight: 115x100x23 mm / approx 117g

Standards compliance
Safety: 73/23/EEC and 93/68/EEC directives, EN61010.1 safety standard
EMC: 89/366/EEC directive and following modifications
93/31/EEC and 93/68/EEC, EN50081-2, EN50082-2, EN61326/A1

Related products

RELATED PRODUCTS