Rogowski Coil MFC150-UI/F

from 1,00€

Rogowski Coil MFC150-UI/F (8 mm cross section) is a flexible current transducer based on Rogowski principle.
The MFC150-UI/F is offered as an all-in-one solution with a built-in integrator. This eliminates the need for any external conditioning equipment, simplifying installation and delivering significant space and cost savings. Users benefit from a compact, single-unit system that provides the required 90° phase compensation and frequency equalization.
MFC150-UI/F coils are available in different sizes and can be supplied according to customer’s design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/ or weight.
MFC150-UI/F coil is provided with a shield against the influence of external magnetic fields, therefore it grants a stable measurement from low currents to hundreds of kA.
UL 2808 Certified.



Catalogue
Datasheet
User manual
Video

BEST SELLER CONFIGURATIONS REQUEST MORE INFORMATION

SKU: N/A Category: Tag:

NAMEDESCRIPTIONEAN
Rogowski Coil MFC150-UI/F - MFC150-UI/F 3604.0001.0001

WITH BUILT-IN INTEGRATOR - (333mV/1kA OUTPUT VALUE)

MFC150-UI/F 40cm length Ø ~11cm calibrated 3m cable
8058757520588
Rogowski Coil MFC150-UI/F - MFC150-UI/F 3604.0002.0001

WITH BUILT-IN INTEGRATOR - (333mV/2kA OUTPUT VALUE)

MFC150-UI/F 60cm length Ø ~17.5cm calibrated 3m cable
8058757520595
Rogowski Coil MFC150-UI/F - MFC150-UI/F 3604.0009.0001

WITH BUILT-IN INTEGRATOR - (333mV/5kA OUTPUT VALUE)

MFC150-UI/F 90cm length Ø ~27cm calibrated 3m cable
8058757520601

Description

DO YOU NEED ADDITIONAL CONFIGURATIONS?

For other configurations contact the sales representative

TECHNICAL SPECIFICATIONS

Coil
Coil length: 25 … 300 cm
Coil diameter: 5 … 94 cm
Cord diameter: 8.3 ±0.2 mm
Cord material: polyphenylene and thermoplastic elastomers
Fastening: bayonet holder
Weight: 150 … 500 g

Electrical characteristics for model with integrator
Power voltage: 4 … 26 VDC
Max consumption: 5 mADC
Nominal output rate: 333 mV / FS (RMS values) – FS changes according to the model: 1, 2, 5 kA
Positioning error: Better than ±1% of reading
Frequency: 50/60 Hz
Maximum primary voltage: 600 V CAT IV, Service Entrance
Pollution degree: 2, Controlled Environment for indoor use model – 3, Uncontrolled Environment for outdoor use model
Insulation test voltage: 7400 VRMS / 5 s

Connection cable for model with integrator
Type: 5 x 24 AWG shielded
Length: 3 m

Environmental conditions
Protection degree: IP65 for indoor use model – IP68 for outdoor use model
Operating temperature: -35 … +75°C up to 2 kA, -35 … +60°C from 2 to 5 kA
Storage temperature: -40 … +90°C

Standard compliance
IEC, UL standards: ANSI/CAN/UL 2808, CSA C22.2 NO. 61010-1-12, IEC 61010-2-032, IEC 61010-1 Ed3, IEC 60529

Certification

RELATED PRODUCTS