Rogowski coil MFC150/F

from 1,00€

Rogowski Coil MFC150/F (8 mm cross section) is a flexible current transducer based on Rogowski principle.
The MFC150/F is offered as an all-in-one solution with a built-in integrator. This eliminates the need for any external conditioning equipment, simplifying installation and delivering significant space and cost savings. Users benefit from a compact, single-unit system that provides the required 90° phase compensation and frequency equalization.
MFC150/F coils are available in different sizes and can be supplied according to customer’s design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/ or weight.
MFC150/F coil is provided with a shield against the influence of external magnetic fields, therefore it grants a stable measurement from low currents to hundreds of kA.



Catalogue
Datasheet
User manual
Video

BEST SELLER CONFIGURATIONS REQUEST MORE INFORMATION

SKU: N/A Category: Tag:

NAMEDESCRIPTIONEAN
Rogowski coil MFC150/F - MFC150/F 3118.0001.0001

WITH BUILT-IN INTEGRATOR - (333mV/1kA OUTPUT VALUE)

MFC150/F length 40cm Ø ~11cm calibrated 3m cable
8058757520410
Rogowski coil MFC150/F - MFC150/F 3118.0002.0001

WITH BUILT-IN INTEGRATOR - (333mV/2kA OUTPUT VALUE)

MFC150/F length 60cm Ø ~17.5cm calibrated 3m cable
8058757520427
Rogowski coil MFC150/F - MFC150/F 3118.0003.0001

WITH BUILT-IN INTEGRATOR - (333mV/5kA OUTPUT VALUE)

MFC150/F length 90cm Ø ~7cm calibrated 3m cable
8058757520434

Description

DO YOU NEED ADDITIONAL CONFIGURATIONS?

For other configurations contact the sales representative

TECHNICAL SPECIFICATIONS

Coil
Coil length: from 25 to 300 cm
Coil diameter: 8.3 ±0.2 mm
Fastening: bayonet holder
Weight: from 150 to 500 g
Material: thermoplastic UL94-V0

Electrical characteristics for model with integrator
Power voltage: 4 … 26 VDC
Max consumption: 5 mADC
Nominal output rate: 333 mV / FS (RMS values)
FS changes according to the model: 1, 2, 5 kA
Positioning error: Better than ±1% of reading
Frequency: 50/60 Hz
Overvoltage category: 1000 V CAT III, 600 V CAT IV
Pollution degree: 2
Insulation test voltage: 7400 VRMS / 5 s

Connection cable for model with integrator
Type: 5 x 22 AWG shielded
Length: 3 m

Enviromental conditions
Operating temperature: from -30°C to +80°C
Storage temperature: from -40°C to +80°C
Protection degree: IP67 or IP68 according to the model (not evaluated by UL)

Standard compliance
IEC, UL standards: UL 61010-1 Ed3, UL 61010-2-032, CAN/CSA-C22.2 No. 61010-1,IEC 60529

Certification

RELATED PRODUCTS