Rogowski coil MFC140-UI/F

from 1,00€

Rogowski Coil MFC140-UI/F (7 mm cross section) is a flexible current transducer based on Rogowski principle.
The MFC140-UI/F is offered as an all-in-one solution with a built-in integrator. This eliminates the need for any external conditioning equipment, simplifying installation and delivering significant space and cost savings. Users benefit from a compact, single-unit system that provides the required 90° phase compensation and frequency equalization.
MFC140-UI/F coils are available in different sizes and can be supplied according to customer’s design, therefore they can be used in all those applications, in which traditional transducers are not fitting due to its size and/ or weight.
MFC140-UI/F coil is provided with a shield against the influence of external magnetic fields, therefore it grants a stable measurement from low currents to hundreds of kA.
MFC140 series features an integrated fixing mechanism for simple and secure, direct-to-conductor mounting.
UL 2808 Certified.



Catalogue
Datasheet
User manual

BEST SELLER CONFIGURATIONS REQUEST MORE INFORMATION

SKU: N/A Category: Tag:

NAMEDESCRIPTIONEAN
Rogowski coil MFC140-UI/F - MFC140-UI/F 3702.0001.0001

WITH BUILT-IN INTEGRATOR - (333mV/200A OUTPUT VALUE)

MFC140-UI/F length 15cm Ø ~4 (4x5) calibrated 3m cable
8058757520489
Rogowski coil MFC140-UI/F - MFC140-UI/F 3702.0002.0001

WITH BUILT-IN INTEGRATOR - (333mV/250A OUTPUT VALUE)

MFC140-UI/F length 28cm Ø ~8cm calibrated 3m cable
8058757520496
Rogowski coil MFC140-UI/F - MFC140-UI/F 3702.0003.0001

WITH BUILT-IN INTEGRATOR - (333mV/600A OUTPUT VALUE)

MFC140-UI/F length 40cm Ø ~12cm calibrated 3m cable
8058757520502
Rogowski coil MFC140-UI/F - MFC140-UI/F 3702.0004.0001

WITH BUILT-IN INTEGRATOR - (333mV/1kA OUTPUT VALUE)

MFC140-UI/F length 50cm Ø ~15cm calibrated 3m cable
8058757520519

Description

DO YOU NEED ADDITIONAL CONFIGURATIONS?

For other configurations contact the sales representative

TECHNICAL SPECIFICATIONS

Coil
Coil length: 15 … 50 cm
Cord diameter: 7.2 ±0.2 mm
Fastening: bayonet holder
Weight: from 150 to 500 g
Jacket material: Polyphenylene and thermoplastic elastomer

Electrical characteristics for model with integrator
Power voltage: 4 … 26 VDC
Max consumption: 5 mADC
Nominal output rate: 333 mV / FS (RMS values)
FS changes according to the model: 200, 250, 600, 1000 A
Positioning error: Better than ±1% of reading
Frequency: 50/60 Hz
Maximum primary voltage: 600 V CAT IV, Service Entrance
Pollution degree: 3, Uncontrolled Environment
Insulation test voltage: 7400 VRMS / 5 s

Connection cable for model with integrator
Type: 5 x 24 AWG shielded
Length: 3 m

Environmental conditions
Protection degree: IP68
Operating temperature: -35 … +75°C up to 2500 A with 15 … 41 cm coil length
-35 … +60°C up to 5000 A with 42 … 50 cm coil length

Standards compliance
IEC, UL standards:
ANSI/CAN/UL 2808, CSA C22.2 NO. 61010-1-12, IEC 61010-2-032,
IEC 61010-1 Ed3, IEC 60529

Certification

RELATED PRODUCTS