Skip to main content

Our multiscale integrator RPS51 has been developed to facilitate the implementation of Rogowski coils in your system in a simple and effective way. Whether it is a new or existing installation, the combination of these two devices brings handiness, flexibility, and accuracy to measurements of current in your system where the use of a traditional transformer limits your capabilities.

 

HERE ARE 5 (+1) REASONS TO CHOOSE RPS51

  1. Flexibility of application thanks to the 1A output, which allows to be combined Algodue Rogowski coils to a measuring instrument with 1A CTs input;
  2. Multiscale feature up to 5000A, suitable for most applications where multiple measurement demands must be met;
  3. Compact size, only 1 DIN module;
  4. Fixed DIN rail mounting;
  5. Dynamic solution, ideal for new and retrofit installations;

+1: Universal solution, because each of the 4 selectable scales can be measured with the same coil.

 

OUR MATCHING COILS

MFC140

  • Coil diameter down to 7mm;
  • Equipped with accessory for fastening to the conductor;
  • 4 coil lengths available: 15, 28, 40, and 50cm.

MFC150

  • Suitable for large, irregularly shaped conductors, or those with reduced accessibility;
  • Multiple coil lengths available, from 25cm up to 300cm;
  • Different output cable lengths: 3, 5, 7, 10, 15m.
My Agile Privacy

This site uses technical and profiling cookies. 

You can accept, reject, or customize the cookies by clicking the desired buttons. 

By closing this notice, you will continue without accepting. 

Warning: some page functionalities could not work due to your privacy choices: