|
| |
|
|
 |
|
|
|
|
|
|
|
|
|
|
 |
ALGODUE meters
and software
are the best solution for metering and analysing
the power consumption |
|
|
Are you looking for a special
solution?
Click
here |
|
|
|
|
|
|
|
|
I/O boards 
Features
Digital outputs
This module can be equipped with 2
or 4 isolated outputs. The digital outputs can detect when
a threshold is overcome or can be used for energy pulse emission.
· Number of channels 2 / 4
· ML type: 50 VAC/DC/200mA (OPTOMOS), 2 or 4
outputs
· MH type: 250 VAC/DC/100mA (OPTOMOS), 2 or 4
outputs
· RL type: 250 VAC/5A resistive (RELAY), 2 relay outputs
Analog outputs
This module is equipped with 2 analog
outputs. The analog outputs can be programmed as 0-20 mA or
4-20 mA and can be used in order to transmit a signal to an
external device. For 8 analog outputs see the EM80A
module.
· Number of channels: 2
· Type 0-20 / 4-20 mA configurable. Active outputs
with no
need of external power supply
· Load: 300 Ohm max.
· Resolution: 12 bit
Digital inputs
This module is equipped with 4 isolated
digital inputs. The digital inputs can be used for the acquisition
of energy pulses. The inputs have no need for an external
power supply. The value of the pulse is programmable, allowing
to count other values than energy.
· Number of channels: 4
· Type: isolated for voltage-free contact
· Max frequency: 10Hz
EBUS fast communication bus
This module allows to extend the possibility
of the meter to drive I/O.
The bus communicate with the external device at high speed and
make it possible to implement complex functions like EM80A (eight
analog outputs)
· Transmission: synchronous serial
· Connection 4 wires
· Length: max 10 m
|
|
